齒形及幾何圖形
詳細說明
|
根據不同切割需求，使用不同齒形 | |
| Tooth Form “A” And “AW” For thin Metal Slitting Saw Blades with a tooth Pitch up to approx.3.0mm Advisable for brass,tooth from “A”is suitable for slotting materials. All teeth of tooth form “AW” are bevellde alternatively. 三角齒及三角齒倒角 用于一般銑槽及軟金屬的切割 左右間隔三分之一倒角 |
 |
|
-------------------------------------------------------------------------------------------------------------------------------------------------------- | |
| Tooth Form “B” And “BW” Suitable for cutting tubes and porfiles made of steel or non-ferrous metals.Tooth form “B”is specialized for cutting very thin-walled pipes And profiles.All teeth form “BW”are bevellde alternatively. 圓弧齒及圓弧左右齒 用于薄壁金屬管類的切割 左右間隔三分之一倒角 |
 |
|
-------------------------------------------------------------------------------------------------------------------------------------------------------- | |
| Tooth Form HZ This tooth is also known as form “C” Teeth are ground according to the roughing and finishing tooth system.A tooth pair is consisting of one roughing tooth (1/3cutting Width)and one finishing tooth(2*1/3 cutting width).According to the triple chip geometry the roughing tooth is approx*0.2-0.3mm highre Compared with the finishing tooth.Tooth form“HZ”is suitable for Cutting solid materials. 高低齒 用于厚壁金屬管類的切割 隔齒兩邊三分之一倒角，倒角齒不倒角齒0.2-0.3mm |
 |
|
-------------------------------------------------------------------------------------------------------------------------------------------------------- | |
| Tooth Form BR Tooth form BR is a parrot tooth with chip breaker,This tooth form is Suitable for cutting pipes under high performance conditons Bacause the teeth are side cutting 開槽齒 用于實心金屬管類重切割 在三分之一處開槽 |
 |
上一條: 常見鋸片遇到的問題及解決方案
浙公網安備 33112202000156號
關閉返回